Surface Recovery & Separation

At Strata Energy, we want to provide the best operational capacity in the world, so our Surface Recovery & Separation Systems are designed and built by expert field personnel to withstand large variables of temperatures and conditions.

Strata Energy currently operates a fleet of trailer mounted and skid mounted drilling recovery systems in a variety of configurations, all designed for the rapidly growing field of Underbalanced and Managed Pressure Drilling.

We believe in taking a "site specific" approach during the design and constitution of our equipment. By increasing the efficiency of our units while reducing the footprint size on the drilling location, our goal is to maintain a cutting edge formula that allows for greater project success and cost savings for our clients.

With full 4 phase, 500 psi trailer mounted vessels and 5000 psi drill manifold systems we are able to maintain fluid flow rates of 30,000 bbl/day and gas flow rates of up to 65,000 mmscf/day. Through these design advantages we can offer industry-leading mobilization and rig up, and assembly times for our Surface Recovery and Separation equipment.		   Request INfo on Surface Recovery & Seperation systems

Download

DRS Specifications

4 Phase Skid Mounted Vessel:

Overview

  • Up to 500 psi rated working pressure
  • Fluid flow rate of 30,000 bbl/day
  • Gas flow rate 65,000 mmscf/day
  • Multiple compartments for added multiphase separation
Designed and fabricated in accordance with:
  • ASME Section VIII, Div. 1
  • Alberta Boilers Safety Association (ABSA)
  • ASME “U” Stamp Certification

4” 5000 psi Drill Manifold

  • 4” main flow path
  • Up to 6”-5000# valves for diversion and isolation 
  • 4” choke loop c/w up to 6”-5000# valves 
  • 3 1/8”-5000# H 2 Cameron Choke, Tungsten Stem, and Seat
  • Provision for second choke loop 
  • All direction changes utilize API studded blocks

Geological Sampling System

  • Dual samplers allow the operator to alternate between samplers
  • Excess cuttings return to separator to alleviate environmental concerns

Kelly Bleed Off Manifold

Permanently mounted in operator compartment

  • Ties into 4 separate flow paths:
  • Vessel 
  • Flare Stack 
  • Fluid Storage Tanks
  • Sparge Coil
  

Fluid Handling System:

Fluid Transfer Pumps

  • 2 – 3 x 4 Mission Space Saver Centrifical Pumps 
  • Transfer pumps allow fluid transfer with zero vessel pressure
  • May operate pumps in tandem to handle large volumes 
  • Operate pumps separately for multi-phase fluid transfer
  • Pumps are pneumatically actuated to maintain fluid level

Fluid Dump Valves

2 Masoneilan Camflex II Valves

Solids Pump

  • 4 x 2 progressive cavity screw pump 
  • Moves cuttings from separator 
  • Variable Frequency Drive (VDF)

Pipe Racks and Pipe Works

Fully equipped

Flare Stack

  • 6” diameter, comes with 2 x 4” auxiliary lines 
  • Heights of 40’, 60’, 80’ to 120’
  • Rated for up to 65 mmscfd

Field Staff

  • Qualified and experienced 
  • Up-to-date with all safety training 
  • Ongoing training programs exist to maintain highly qualified personnel