Membrane Nitrogen & Compression Services

One of the key mandates of Strata Energy Services is to support our clients with quality Membrane Nitrogen & Compression equipment that will meet their specific project requirements anywhere in the world. This includes minimizing transport costs, rig up/rig out time, and environmental footprint, while maximizing fuel efficiency and ease of maintenance.

Strata Energy offers Membrane Nitrogen & Compression equipment that is capable of operating in ambient conditions ranging from -50C to over 55C. As pressure and volume requirements can differ from project to project we are capable of delivering up to 2000 scfm of nitrogen to a final discharge pressure of up to 5000 psi. We are also unique in the fact that our equipment can be arranged to be trailer mounted, oilfield skidded, or sea framed c/w four-point lift.

We continue to develop, support, and integrate our equipment and people to provide dependable Membrane Nitrogen & Compression products.		   Request Info on Nitrogen & Compression Services

Download

Membrane Nitrogen & Compression Specifications

Primary Air Compressors:

Quantity of Three Sullair – 1150 – 1500 scfm @ 350 psig, two-stage helical screw compressors

Overview:

  • Noise and emission compliant with new legislation
  • Powered by Caterpillar TEIR 3 electronic engine control system for reliability and optimizes fuel economy
  • Turbo charged and water cooled 
  • Electronic controls with diagnostic indicator 
  • system and engine monitor system
  • Reduces downtime and eases supervision 
  • Automatic inlet valve and unloaded starting 
  • 24 VDC electric system 
  • Integrated air after cooler core with moisture separator

Mist Pump:

Gardner Denver TEEF Pump rated up to 5000 psi powered by a CAT C-7 diesel engine with 5-speed Eaton transmission

Overview:

  • 1 ¾” Plungers with 3” available
  • C/W Air Shut Down
  • 5 gallon Greer Pulsation Dampener
  • +/- 5 gallons, pumps up to 47 gallons per minute
  

Nitrogen Booster:

Ariel JGJ/2 diesel driven booster compressor, design parameters 1500 – 2000 scfm with 320 psig suction with discharge pressure up to 5000 psig

Overview

  • Murphymatic control panel with electronic digital fault enunciator with tachometer/hour meter
  • Horizontally opposed cylinders for smooth operation
  • 24 VDC electrical system

Nitrogen Generator:

  • NGU 1500 HP rated to produce 1500 - 2000 scfm @ 96% nitrogen with a balance of oxygen and other inerts
  • Utilizes the latest 350 psig high pressure modules and delivering the highest recovery rates in the industry
  • Programmable logic micro-controller provides automatic control of nitrogen purity and safety shutdowns
  • Monitors and logs operating parameters
  • flows, pressure, temperatures, and gas purity